BEAM XPRESSi – Remote Monitoring and Administration
The BEAM XPRESSi supports multiple monitoring and administration possibilities.
Remote Control Options
The BEAM XPRESSi automotive router supports the following remote control capabilities:
Remote control method | Can get parameters | Can set parameters |
|---|---|---|
RMS | Yes | Yes |
SSH | Yes | Yes |
HTTP | Yes | Yes |
SMS | Yes | Yes |
JSON-RPC | Yes | Yes |
VPN | Yes | Yes |
RMS
The Remote Management System (RMS) is designed to conveniently monitor and manage all your BEAM XPRESSi devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.
RMS access can be configured from the System → Administration → RMS page.
Public IP
If you’re using a SIM card that has a Public IP address you can reach the router via HTTP or SSH via its WAN IP address.
HTTP Access
Remote HTTP access can be set up via the System → Administration → Access Control page.
SSH Access
Remote SSH access can be set up via the System → Administration → Access Control page.
SMS
The BEAM iSERIES can be controlled via SMS messages using SMS utilities rules. SMS can be configured via the Services → SMS Utilities → SMS Rules page.
JSON-RPC
JSON-RPC access can be set up via the System → Administration → Access Control page.
VPN
Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by the BEAM iSERIES, visit the VPN manual page.
