BEAM XPRESSi – Supported Frequency Bands
Summary
Different countries and network operators use different frequency bands for communication in their respective mobile networks. Therefore, in order to communicate within an operator’s network, the mobile equipment to has to support the frequency bands used by that operator.
This page contains information about mobile frequency bands supported by the BEAM XPRESSi router.
Supported Bands
Devices ordered under different product codes may support different frequency bands. Specifically for the BEAM XPRESSi router, the seventh symbol of the product code indicates the intended region of operation.
The table below displays bands supported by the BEAM XPRESSi router based on its product code:
Product Code | Region (operator) | Supported Bands |
|---|---|---|
BEAM XPRESSi 9***** | Europe, the Middle East, Africa, Korea, Thailand, India | 4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28A (700 MHz)
4G (LTE-TDD): B38 (2600 MHz), B40 (2300 MHz), B41 (2500 MHz)
3G: B1 (2100 MHz), B8 (900 MHz)
2G: B3 (1800 MHz), B8 (900 MHz) |
BEAM XPRESSi 4***** | North America (AT&T, Bell, T-Mobile)1 | 4G (LTE-FDD): B2 (1900 MHz), B4 (1700 MHz), B12 (700 MHz)
3G: B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz) |
BEAM XPRESSi 5***** | North America (Verizon)1 | 4G (LTE-FDD): B4 (1700 MHz), B13 (700 MHz) |
BEAM XPRESSi 6***** | Australia (Telstra) | 4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B28 (700 MHz)
3G: B1 (2100 MHz), B5 (850 MHz) |
BEAM XPRESSi 7***** | South America, Australia, New Zealand, Taiwan | 4G (LTE-FDD): B1 (2100 MHz), B22 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B28 (700 MHz)
4G (LTE-TDD): B40 (2300 MHz)
3G: B1 (2100 Mhz), B2 (1900 Mhz), B5 (850 Mhz), B8 (900 MHz)
2G: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) |
BEAM XPRESSi 8***** | Japan | 4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B8 (900 MHz), B18 (850 MHz), B19 (800 MHz), B26 (850 MHz)
4G (LTE-TDD): B41 (2500 MHz)
3G: B1 (2100 MHz), B6 (800 MHz), B8 (900 MHz), B19 (800 MHz) |
BEAM XPRESSi A***** | Global | 4G (LTE-FDD): B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B12 (700 MHz), B13 (1800 MHz), B18 (850 MHz), B19 (800 MHz), B20 (800 MHz), B26 (850 MHz), B28 (700 MHz)
4G (LTE-TDD): B38 (2600 MHz), B39 (1900 MHz), B40 (2300 MHz), B41 (2500 MHz)
3G: B1 (2100 MHz), B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz), B6 (800 MHz), B8 (900 MHz), B19 (800 MHz)
2G: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) |
1 Router is not certified on AT&T, Verizon, Bell and T-Mobile networks.
2 LTE B2 of BEAM XPRESSi 7***** version does not support Rx-diversity.
If you are unsure which product code is right for you, you can contact us for that information.
