Search For Topics
BeamOS – Device
The Device section displays information related to the device’s hardware. This page is an overview of the Device section of BEAM devices.
The figure bellow is an example of the Device section and the table below provides explanations on the fields contained in that section:
A unique 10-digit device identifier. It is required when connecting the device to the Remote Management System (RMS). The device can be added to RMS via the System → Administration → RMS page
a.k.a., ordering code, displays under which product code the device was manufactured. Different product codes indicate different versions of the overall product. For example, devices with different product codes may support different LTE bands, come with different accessories, different firmware, etc.
A 4-digit number that indicates the batch of materials
A 4-digit number representing the router’s hardware revision version
The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify mobile modules. GSM network operators use the IMEI to identify devices in their networks
The IMSI (international mobile subscriber identity) is a unique 15 decimal digit (or less) number used to identify the user of a cellular network
Wireless MAC address
The media access control (MAC) address is a unique identifier used to distinguish a network interface controller for communication in the data link layer (OSI layer 2). This field displays the MAC address of the device’s wireless radio
The modem’s model number
Modem’s current firmware version