Skip to content

BEAM XPRESSi – LEDs

BEAM XPRESSii with logo

Power LED #

The power LED is located on the left corner of the front panel, to the left of the SIM holder:


BEAM XPRESSi LEDs display

It can perform two different actions:

ActionDescription
LED turned ONRouter is powered up
LED turned OFFRouter is not powered up

WiFi LED #

The WiFi LED is located on the router’s front panel, between the reset button and the connection status LEDs:


BEAM XPRESSi Wifi LED

It can perform two different actions:

ActionDescription
LED turned ONWiFi is enabled
LED turned OFFWiFi is disabled

Connection status LEDs #

The connection status LEDs are located near the right corner of the front panel, to the left of the signal strength indication LEDs:


BEAM XPRESSi Connection status LEDs

The LEDs display the router’s current connection state and network type among a few other things:

ActionDescription
2G, 3G and 4G LEDs blinking every 1 secNo SIM or bad PIN
Repeated blinking from 2G LED to 4G LEDSIM holder not inserted
2G LED blinking every 1 secConnected 2G, no data session established
3G LED blinking every 1 secConnected 3G, no data session established
4G LED blinking every 1 secConnected 4G, no data session established
2G LED turned ONConnected 2G with data session
3G LED turned ONConnected 3G with data session
4G LED turned ONConnected 4G with data session
2G LED blinking rapidlyConnected 2G with data session and data is being transferred
3G LED blinking rapidlyConnected 3G with data session and data is being transferred
4G LED blinking rapidlyConnected 4G with data session and data is being transferred

Signal strength LEDs #

The signal strength LEDs are located on the right corner of the front panel, to the right of the connection status LEDs


BEAM XPRESSi signal strength LEDs

Each lit up LED represents a different value of the router’s current signal strength in RSSI:

NO. OF LIT UP LEDsSIGNAL STRENGTH VALUE
0≤ -111 dBm
1-110 dBm to -97 dBm
2-96 dBm to -82 dBm
3-81 dBm to -67 dBm
4-66 dBm to -52 dBm
5≥ -51 dBm

The signal strength LEDs can also be used as a time indicator for holding the reset button. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Each second, a new signal strength LED lights up. When all 5 LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and that you can release it.

After releasing the button, all 5 LEDs will start blinking every 1 second. This signifies that the router has begun the factory reset.

Powered by BetterDocs

SAVE

10%

It only takes a few seconds

DON'T MISS OUT

SUBSCRIBE AND SAVE 10%

GET EXCLUSIVE OFFERS AND THE LATEST PRODUCT NEWS.

WE WILL GIVE YOU A 10% OFF VOUCHER CODE FOR YOUR NEXT ORDER AS A THANK YOU!

Website-Subscription-Opt-in