Skip to content

BeamOS – SMS Gateway

BEAM OS Logo

Summary #

The SMS Gateway service is used to set up various SMS related (mostly automated) functions. This chapter is a summary of the SMS Gateway service of BEAM routers.

Post/Get #

The Post/Get Configuration section is used to turn ON and configure SMS related post/get settings. When the function is enabled, it provides you with the possibility to perform SMS related action requests by writing them in the URL field of your web browser.

The figure below is an example of the Post/Get Configuration page and the table below provides information on fields contained in that page:

BeamOS Networking device manual SMS gateway post get screen

Field NameValueDescription
Enableyes | no; Default: noTurns SMS post/get ON or OFF
Usernamestring; Default: user1User name used for authorization when sending post/get requests
Passwordstring; Default: user_passPassword used for authorization when sending post/get requests

SMS Post/Get usage examples #

Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:

ActionPost/get URL examples
View mobile messages listhttp://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass
Read mobile messagehttp://192.168.1.1/cgi-bin/sms_read?username=user1&password=user_pass&number=1
Send mobile messagehttp://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
View mobile messages totalhttp://192.168.1.1/cgi-bin/sms_total?username=user1&password=user_pass
Delete mobile messagehttp://192.168.1.1/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
  • 192.168.1.1 – router’s IP address. (Replace it with your LAN IP or WAN IP (when connecting remotely))
  • SMS related post/get commands. Possible values are:
    • sms_list – view all SMS messages in storage
    • sms_read – read a single SMS message by specified SMS index (number)
    • sms_send – send an SMS message to specified recipient
    • sms_total – display SMS storage statistics
    • sms_delete – delete a single SMS message by specified SMS index (number)
  • & – separation symbol. After specifying the SMS command, other parameters must be separated by an ampersand (&) symbol
  • username – SMS post/get configuration user name
  • password – SMS post/get configuration password
  • number – SMS message index or (depending on context) recipient’s phone number. SMS message indexes can be viewed with the sms_list command.
    Correct phone number format is:
    • 00 – number must be preceded by two zeros
    • – the next following element is the number holder’s country code
    • – phone number of the recipient

    For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver’s phone number, all preceded by 00)

  • text – SMS message text

Email to SMS #

Email to SMS is a function that connects to your email account and checks its inbox at the specified frequency. If it finds any new received emails with a specific subject (phone number in email subject), it sends the body of the email as an SMS message(s) to the recipient specified in the email subject field.

Important note: all POP3 server email messages from inbox will be deleted when using this service.

BeamOS Networking device manual SMS gateway email to SMS screen

Field NameValueDescription
Enableyes | no; Default: noTurns Email to SMS ON or OFF
POP3 serverhost | ip; Default: noneEmail service provider’s POP3 server address (can be looked up online)
Server portinteger [0..65535]; Default: noneEmail service provider’s POP3 server port (can be looked up online)
Usernamestring; Default: noneEmail account user name. This is information is used by router in order to atuhenticate itself when connecting to the email client
Passwordstring; Default: noneEmail account password. This is information is used by router in order to authenticate itself when connecting to the email client
Secure connection (SSL)yes | no; Default: noSSL is a protocol for transmitting private documents via the Internet. SSL uses a cryptographic system that uses two keys to encrypt data − a public key known to everyone and a private or secret key known only to the recipient of the message
Max. email symbol countinteger; Default: 160Limit of symbols that can be contained in the email body of text. Emails that contain more symbols than it is specified in this field will not be sent as SMS messages
Check email everytime [1 minute to 15 days]; Default: 1 minuteEmail inbox check interval

Additional note: you may have noticed that there is no option where you can specify the recipient’s phone number. As mentioned earlier, Email to SMS doesn’t forward all emails, only the ones that are meant to be forwarded. Only emails with the recipient’s phone number in the subject will be forwarded to SMS

Correct phone number format is:

  • 00 – number must be preceded by two zeros
  • <country_code> – the next following element is the number holder’s country code
  • <receivers_number> – phone number of the recipient

For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver’s phone number, all preceded by 00)

Scheduled SMS #

Scheduled SMS allows you to set up the router to periodically send SMS messages to a specified number. Scheduled messages are managed in rule form. Therefore, to configure a new Scheduled Message, we must first create a rule. To create a new rule, type in a phone number in the Phone number field located in the Scheduled Messages Configuration section and click the Add button located next to it.

After this you will be redirected to the Scheduled Messages Configuration window where you can configure all parameters related to the rule. Once you save the configuration, you will be redirected back to the Scheduled SMS page, where you will see your new rule in the Messages To Send section:

BeamOS Networking device manual SMS gateway scheduled SMS screen

Scheduled Messages Configuration #

The figure below is an example of the Scheduled Messages Configuration window and the table below provides information on the field contained in that window:

BeamOS Networking device manual SMS gateway scheduled SMS configuration screen

Field NameValueDescription
Enableyes | no; Default: noTurns the rule ON or OFF
Recipient’s phone numberphone number; Default: nonePhone number of the recipient that will receive the scheduled messages
Message textstring; Default: noneThe message that will be sent
Message sending intervaltime; Default: Day, hour 1, minute 1The frequency at which scheduled messages will be sent

Auto Reply #

Auto reply is a function that responds to received SMS messages with a user defined automatic response. The figure below is an example of the Auto Reply section and the figure below provides information on the fields contained in that section:

BeamOS Networking device manual SMS gateway auto reply screen

Field NameValueDescription
Enableyes | no; Default: noTurns Auto Reply ON or OFF
Reply SMS Utilities rulesyes | no; Default: noWhen enabled, the router will also reply to messages that trigger SMS Utilities rules
Don’t save received messagesyes | no; Default: noWhen enabled, the router deletes all received SMS messages
ModeEveryone | Listed numbers; Default: EveryoneIndicates whether the router should reply to messages from all recipients or just the specified numbers
Message textstring; Default: noneText that will be sent in the automatic response
Recipient’s phone numberphone number; Default: nonePhone number(s) that will trigger Auto Reply. To add multiple numbers, click the ‘green plus’ symbol.
This field becomes visible if the chosen Mode is “From listed numbers only”

SMS Forwarding #

The SMS Forwarding tab contains three sections:

  • SMS Forwarding To HTTP
  • SMS Forwarding To SMS
  • SMS Forwarding To Email

Each of which can be used to set up forwarding of incoming SMS message to either HTTP, email or or another phone number.

SMS Forwarding to HTTP #

The SMS Forwarding To HTTP function forwards received SMS messages to HTTP by using either Post or Get methods. The figure below is an example of the SMS Forwarding To HTTP section and the table below provides information on the configuration fields contained in that section:

BeamOS Networking device manual sms gateway sms forwarding http screen

Field NameValueDescription
Enableyes | no; Default: noTurns SMS Forwarding To HTTP ON or OFF
Forward SMS Utilities rulesyes | no; Default: noWhen checked the router will also forward SMS Utilities rules (the default action is to not forward SMS messages that SMS Utilities rule)
Use HTTPSyes | no; Default: noCheck to use the HTTPS protocol instead of HTTP
HTTPS Certificate verificationIgnore | Verify; Default: IgnoreIndicates whether the server’s certificate will be ingored or verified.
MethodPost | Get; Default: GetDefines the HTTP transfer method
URLhost | ip | host:port | ip:port; Default: noneURL or IP address to which the messages will be forwarded. By default, the router forward messages to the default HTTP port (port 80). To specify a different port add a colon (:) symbol followed by the port number (for example, 192.168.1.1:81)
Number value namestring; Default: none Name to assign to sender’s phone number value in query string
Message value namestring; Default: noneName to assign to message text value in query string
Extra data pair 1 / Extra data pair 2string; Default: noneTransfers extra information through the HTTP request. Enter variable name on the left field and its value on the right.
For example, when using the Post method, one may enter some static information about the device, like ‘Router name’ on the left and ‘RUT240’ on the right.
This can also be utilized when using the Get method to request data from an HTTP server
ModeAll messages | From listed numbers; Default: All messagesSpecifies whether all messages should be forwarded or only those received from specific numbers
Sender’s phone numberphone number; Default: nonePhone number(s) that will qualify for forwarding. To add multiple numbers, click the Services sms gateway auto reply plus symbol. This field becomes visible when the “Mode” field value is set to ‘From listed numbers’
SMS Forwarding to HTTP #

This example will atempt to explain how to use the data fields in SMS forwarding to HTTP configuration. The fields in question are Number & Message value name and Extra data pair 1 & 2 fields. The figure below is the configuration we’ll be using for this example:

BeamOS Networking manual sms gateway sms forwarding http example screen
If you configure the router as seen in the image above and send and SMS message to the router containing the text Hello!, from the number +37012345678, the specified server should reiceve an encoded query string that looks like this: Sender=%2B37012345678&Text=Hello%21&Name=RUT240&Code=RUT240%2006E000


The & symbol separates the the key-value pairs, while certain characters (like +, ! and the space symbol) are encoded in UTF-8.
When decoded it might look something like this:

Sender: +37012345678
Text: Hello!
Name: BEAM
Code: BEAM 06E000

SMS Forwarding To SMS #

The SMS Forwarding To SMS function forwards received SMS messages to one or several other phone numbers. The figure below is an example of the SMS Forwarding To SMS section and the table below provides information on the configuration fields contained in that section:

BeamOS Networking device manual sms gateway sms forwarding sms screen

Field NameValueDescription
Enableyes | no; Default: noTurns SMS Forwarding To SMS ON or OFF
Forward SMS Utilities rulesyes | no; Default: noWhen checked the router will also forward SMS Utilities rules (the default action is to not forward SMS messages that SMS Utilities rule)
Add sender’s numberyes | no; Default: noAdds the original sender’s number to the forwarded message
ModeAll messages | From listed numbers; Default: All messagesSpecifies whether all messages should be forwarded or only those received from specific numbers
Sender’s phone numberphone number; Default: nonePhone number(s) that will qualify for forwarding. To add multiple numbers, click the Services sms gateway auto reply plus symbol. This field becomes visible when the “Mode” field value is set to ‘From listed numbers’
Recipient’s phone number(s)phone number; Default: ” “Phone number(s) to which messages are going to be forwarded to. To add multiple numbers, click the Services sms gateway auto reply plus symbol

SMS Forwarding To SMS #

The SMS Forwarding To Email function forwards received SMS messages to one or several email addresses. If this service is enabled and configured correctly, when the router receives an SMS message it will automatically login to the specified email account and send the text message as an email to another specified recipient(s)

The figure below is an example of the SMS Forwarding To Email section and the table below provides information on the configuration fields contained in that section:

BeamOS Networking device manual sms gateway sms forwarding email screen

Field NameValueDescription
Enableyes | no; Default: noTurns SMS Forwarding To Email ON or OFF
Forward SMS Utilities rulesyes | no; Default: noWhen checked the router will also forward SMS Utilities rules (the default action is to not forward SMS messages that SMS Utilities rule)
Add sender’s numberyes | no; Default: noAdds the original sender’s number to the forwarded message
Subjectstring; Default: noneText that will be inserted into the email’s Subject field
SMTP serverhost | ip; Default: noneYour email service provider’s SMTP server address. If you don’t know this address, you can look it up online
SMTP portinteger [0..65535]; Default: noneYour email service provider’s SMTP server port. If you don’t know the port number, you can look it up online
Secure connectionyes | no; Default: noEnables the use of cryptographic protocols. Enable only if your SMTP server supports SSL or TLS
User namestring; Default: noneYour email account’s login user name
Passwordstring; Default: noneYour email account’s login password
Sender’s email addressemail address; Default: noneThe address that will be used to send emails from
Recipient’s email addressemail address; Default: noneThe address(es) to which incoming SMS messages will be forwarded. To add multiple addresses, click the Services sms gateway auto reply plus symbol
ModeAll messages | From listed numbers; Default: All messagesSpecifies whether all messages should be forwarded or only those received from specific numbers
Sender’s phone numberphone number; Default: nonePhone number(s) that will qualify for forwarding. To add multiple numbers, click the Services sms gateway auto reply plus symbol. This field becomes visible when the “Mode” field value is set to ‘From listed numbers’

SMPP #

Short Message Peer-to-Peer (SMPP) is a protocol used for exchanging SMS messages between Short Message Service Centers (SMSC) and/or External Short Messaging Entities (ESME). The figure below is an example of the SMPP section and the table below provides information on the configuration fields contained in that section:

BeamOS Networking device manual sms gateway smpp screen

Field NameValueDescription
Enableyes | no; Default: noTurns SMPP ON or OFF
User nameyes | no; Default: adminUser name used for authentication on the SMPP server
Passwordstring; Default: admin01Password used for authentication on the SMPP server
Server portinteger [0..65535]; Default: 7777SMPP server port

Powered by BetterDocs

SAVE

10%

It only takes a few seconds

DON'T MISS OUT

SUBSCRIBE AND SAVE 10%

GET EXCLUSIVE OFFERS AND THE LATEST PRODUCT NEWS.

WE WILL GIVE YOU A 10% OFF VOUCHER CODE FOR YOUR NEXT ORDER AS A THANK YOU!

Website-Subscription-Opt-in