Skip to content

BeamOS – QoS

BEAM OS Logo

Summary #

With QoS you can prioritize network traffic selected by addresses, ports or services. This chapter is an overview of the QoS function in BEAM SERIES routers.

General settings and Interfaces #

The General settings section is used to enable or disable all QoS functionality and the Interfaces section allows you to set up bandwidth limits for specified network interfaces.
BeamOS Services qos general settings and interfaces screen

Field NameValueDescription
Enableyes | no; default: noToggles QoS functionality ON or OFF
INTERFACES
InterfaceWAN | LAN | PPP; Default: WANInterface that the rule applies to
Enableyes | no; Default: noToggles the rule ON or OFF
Calculate overheadyes | no; Default: noDecreases upload and download ratio to prevent link saturation
Half-duplexes | no; Default: noEnables data transmission in both directions on a single carrier
Download speed (kbit/s)integer; Default: 1024Specifies maximum download speed for the specified interface
Upload speed (kbit/s)integer; Default: 128Specifies maximum upload speed for the specified interface

Classification Rules #

BeamOS Services qos classification rules screen

Field NameValueDescription
TargetPriority | Express | Normal | Low; Default: WANTarget for which the rule will be applied
Source hostAll | ip; Default: AllHost from which data will be transmitted
Destination hostAll | ip; Default: AllHost to which data will be transmitted
ProtocolAll | TCP | UDP | ICMP | — custom –; Default: AllData transmission protocol
PortsAll | integer [0..65535]; Default: 22,53Port(s) that will be used for transmission. You can enter multiple ports by separating them by commas (‘,’)
Number of bytesinteger; Default: ” “The maximum number of bytes for the connection

Powered by BetterDocs

SAVE

10%

It only takes a few seconds

DON'T MISS OUT

SUBSCRIBE AND SAVE 10%

GET EXCLUSIVE OFFERS AND THE LATEST PRODUCT NEWS.

WE WILL GIVE YOU A 10% OFF VOUCHER CODE FOR YOUR NEXT ORDER AS A THANK YOU!

Website-Subscription-Opt-in